Two moveable blades complete with CNC programmable movements and settings with memory features.
80mm maximum cutting height. Accepts materials up to 125mm in thickness. Cutting width up to 310mm.
Width capacity 12-1/4 inch. 13-1/2 inch chain width. 3 inch maximum depth of cut. 7/8 inch minimum strip width.
New Tires, Cold A/C, Includes Bucket, Grapple Saw sold separately
6 Way Blade w/ Shaker, Clearing Pckg w/ Sweeps and Screens, 70% U/C, Enclosed Cab, Heat & A/C
V12 CAT engine, new clutch, balanced hammer mill, just serviced and ready to work.
Reduce the appearance of cellulite, improve and smooth skin texture, slim the body, causing the loss of between 1-8 inches on the very first treatment, firm and tone muscles, lifting slackening areas and flattening the abdomen, detoxify and re-mineralize the body, raising body energy levels and the metabolism
Thickness edgebanding capacity: 0.4-20mm (3/4 in) Minimum panel width: 70mm
0.4-15mm edge thickness capacity, Granular pre-melt, Double motor end trim, Top & Bottom Rough Trim, Top and Bottom Finish Trim with bevel and/or 2-3mm radius cutters, Scraping station, Buffing station, Telescoping panel support rail
CONTROL: ACRAMATIC, MAXIMUM SWING: 21" TURN DIAMETER: 19" MACHINING LENGTH: 59" BAR CAPACITY: 4" CHUCK SIZE: 15" SPINDLE SPEED: 2250 RPM, MAIN MOTOR: 40HP, TURRET POSITION: 8, LIVE TOOLING/MILLING: NO
CONTROL: ACRAMATIC, MAXIMUM SWING: 23.5" TURN DIAMETER: 10.55" MACHINING LENGTH: 20.79" SPINDLE BORE: 2.44" BAR CAPACITY: 2" CHUCK SIZE: 8" SPINDLE SPEED: 5000 RPM, MAIN MOTOR: 29 HP, TURRET POSITION: 12, LIVE TOOLING/MILLING: YES
CONTROL: ACRAMATIC, MAXIMUM SWING: 21.75" TURN DIAMETER: 12" EST.MACHINING LENGTH: 40" SPINDLE BORE: 3.15" BAR CAPACITY: 2.75" EST. CHUCK SIZE: 12" SPINDLE SPEED: 3500 RPM, MAIN MOTOR: 50HP, TURRET POSITION: 12, LIVE TOOLING/MILLING: YES
CONTROL: ACRAMATIC, MAXIMUM SWING: 28" TURN DIAMETER: 13" EST. MACHINING LENGTH: 60" SPINDLE BORE: 4.56" CHUCK SIZE: 18" SPINDLE SPEED: 1600 RPM, MAIN MOTOR: 50HP, TURRET POSITION: 12, LIVE TOOLING/MILLING: NO
CONTROL: FANUC, MAXIMUM SWING: 45" TURN DIAMETER: 21.6" MACHINING LENGTH: 120" SPINDLE BORE: 6.5" BAR CAPACITY: 6.5" SPINDLE SPEED: 7500 RPM, MAIN MOTOR: 60HP, TURRET POSITION: 8, LIVE TOOLING/MILLING: NO
CONTROL: FANUC, MAXIMUM SWING: 11.4" TURN DIAMETER: 7.87" MACHINING LENGTH: 5.8" SPINDLE BORE: 1.46" BAR CAPACITY: 1.1" SPINDLE SPEED: 4500 RPM, MAIN MOTOR: 10HP, TURRET POSITION: 8+6, LIVE TOOLING/MILLING: NO
6BT cummins engine, good 20.5x25 tires, good bucket and brakes, runs excellent
recent center pivot
TURBO, 4-IN-1 FRONT BUCKET, CAB, E-HOE, AUX HYDRAULICS. NICE CLEAN ORIGINAL BACKHOE.
4-IN-1 BUCKET, CAB, E-HOE, TWO LEVER CONTROLS. 18 IN REAR SMOOTH EDGE BUCKET NICE MUNICIPAL MACHINE.
2003 Bobcat T300 HI-FLOW Machine, 2850 Hours, New Undercarriage 200 Hours Ago, This machine is being used a few hours every week. This customer has owned the unit for 3 Years and has ONLY PUT 200 Hours on the machine. Bucket is included. Door will have new latch installed.
2007 S250 Bobcat
Attachment: Bucket, Other
Heat, Power Bob-Tach, 2-SPEED
2006 Bobcat S185 Skidsteer with 841 Hours. Comes Equipped w/ a 61 hp Kubota Liquid Cooled Turbo Diesel Engine, Boom and Quik Tach are Tight, New 10-16.5 Tires, Hydraulics Strong , Unit Weighs 6420LBS, Rated at Lifting 1850 lbs, Standard Flow (16.9 GPM) , ACS Controls (can be hand controls only or hand and foot controls), There Are No Cracks, No Leaks, and No welds, Paint Job is Professionally Touched Up and Rated 8 out of 10, Factory 68 Inch Smooth Bucket, No Bolt on Cutting Edge. Well Maintained Machine. Asking $20,500.00 for this unit.
CAB, HEAT, A/C, HYDRAULIC COUPLER, 2 SPEED, ALL WHEEL/SKID STEER OPTIONS
06 ASV RC-60 Std Flow Hyd 17GPM, w/ 2084 Hrs, Tracks @ 75% Undercarriage Still Good @ 60-70%, There is Rear Hood Damage on The Right Side. Machine is a Great Runner, 63" Bucket, Will Be Serviced Completely. 19,500.00 US dollars
2007 bobcat 335G mini-excavator w/ 1575hrs. cab/heat. hydraulic thumb, 24" bucket w/ teeth, mclaren tracks @ 75%, counterweight option in engine compartment, exchange coupler (manual), 41.8 HP kubota diesel engine, tier 2 emissions. aux. hydraulics 19 GPM flow rate, 142.3" maximum digging depth, max dump height 139.1", arm digging force 5262 lbs, bucket digging force 7892 lbs, rated lift capacity 3963 lbs, very tight unit for the hours. unit weighs 10,000 lbs. $36,900.00 Usd
2005 ASV RC60, OROPS, 1852 Hours, Tracks 50%, U/C 75%, Self Level, 63" Dirt Bucket. $14,900.00
2007 ASV SR70, 269 Hrs, Tracks and U/C @80%, Cab/Heat, 70 HP, HI-Flow @ 30GPM. $32,900.00
Demo hrs, ROPS, Front Weights, Shuttle Shift, 4 hyd remotes, 3 pt hitch, drawbar
work lights, power reverser
Length: 132, Weight: 7,716
Good Machine, Cushion Hitch, Good Tires, No Leaks, 33.25x35 tires, Machine is ready to haul dirt
29.5x35 Tires, Runs Good, No Leaks, Cushion Hitch, Good Floor, Nice Machine
Same as TG9000, CAT engine, hydraulic clutch, pin and plate hammer mill, 14' tub with radial stacker
Model # MLS610 w/work area of 74"x125", 30/35 watt laser w/integrated Laser Pointer Diode, 2.5" FL Optic Assy.,Air Pump MLS/MLT, Software(Raster Engraving Suite),computer,scanner and 20' Roller Track/Stone Carriage Assy, MLS610 Tile Tray Assy. (Currently used for engraving head stones, Located in Honolulu, HI)
Very nice machine, original paint, no leaks, 80% undercarriage, all glass is good.
Only 542 hours since refurbished by factory, V12 1000 horsepower CAT, 21" torque converter.
New mill bearings, new hammers, new screens, new teeth, excellent condition!
New Chains, Flights, Sprockets, No Leaks, 29.5x29 tires, Good Condition, Brakes Work, Nice Machine
Enclosed cab, cold a/c, nice condition, no leaks, original paint, 65% undercarriage, bucket. Rake sold separately.
